AC 2 Prong Power Cord 5ft
4.7Editor score
Five-foot cable length
Supports multiple console families
Thickened PVC cable jacket
Copper-core construction
In this guide
A damaged or missing PS4 power cable can interrupt a gaming setup, especially when the original cord is difficult to locate or no longer fits the console’s power brick. The right replacement depends on the connector shape, electrical rating, cable length, safety certification, and the specific PS4 model being powered.
This guide compares all ten options by connector type, supported devices, wire gauge, current rating, certification, length, construction, and practical suitability. It covers standard figure-eight cords for several PlayStation models, higher-current cords for power-brick setups, and a specialized PlayStation VR power adapter.
Each review explains the product’s strongest qualities, compatibility limits, and best-fit buyer. The rankings also distinguish between console-only replacements and universal cords that can serve televisions, printers, speakers, and other compatible equipment. Prices and availability can change, so confirm current listings before purchasing.
Top 3 Picks for Best PS4 Replacement Power Adapter Cable
for Sony PS4 PS5 Power Cord 2 Prong
4.9Editor score
Broad console compatibility
Six-foot practical length
UL-certified construction
Figure-eight C7 connector
12V 3A AC Adapter for Sony PlayStation VR
4.8Editor score
Twelve-volt three-amp output
Protects against electrical faults
Supports PlayStation VR units
Broad Sony device compatibility
Top 10 Best PS4 Replacement Power Adapter Cable in 2026 Compared
The table below compares connector formats, electrical ratings, cable length, certification, and intended compatibility. Because the products serve different PS4 configurations and peripherals, the correct match depends on the connector attached to the console or power supply rather than the console name alone.
ProductsSpecificationsEditor scorePrice
Editor's Choice
Superer Universal Figure-8 Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
Four-foot ETL cord
4.7Editor score
Editor's Choice
Five-Foot Universal AC Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
Five-foot cable length
4.7Editor score
Best Premium
PS4 Pro C17 Power Cord
C17 appliance connector
125 volts, 10 amps
18 AWG power cord
Six-foot UL cord
4.7Editor score
Mustpoint Four-Pin Connector
Four-pin inline connector
PS4-specific replacement part
CUH-1115A compatible
65-millimeter connector
3.8Editor score
TPLTECH Universal Figure-8 Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
UL-listed construction
4.8Editor score
PlayStation VR 12V Adapter
12-volt DC output
Three-amp power rating
36-watt power output
100–240-volt input
4.8Editor score
Two-Pack Figure-8 Power Cords
C7 figure-eight connector
Two five-foot cords
18 AWG reinforced wire
PS5 and Xbox support
4.8Editor score
Six-Foot UL-Certified Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
Six-foot UL-certified cord
4.9Editor score
Superer Six-Foot TV Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
Six-foot ETL cord
4.7Editor score
Four-Foot PS4 Pro Cord
C17 appliance connector
125 volts, 10 amps
18 AWG power cord
Four-foot UL cord
4.7Editor score
1. Superer Universal Figure-8 Cord – Best Broad Console Compatibility
Superer Universal Figure-8 Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
ETL-certified four-foot cord
The Superer AC Power Cord Cable is a broadly compatible replacement for standard PS4 models that use an IEC 60320 C7 figure-eight connector. It carries a 4.7 rating and stands out for its ETL certification, pure copper core, and support for several PlayStation and Xbox console families. It also works with numerous compatible televisions, printers, speakers, and monitors.
Pros
- Broad console compatibility
- ETL safety certification
- Copper-core construction
- Useful for household devices
- Two-year manufacturer warranty
Cons
- Does not fit PS4 Pro
- Four-foot length may be short
We may earn a commission when you buy through this link, at no additional cost to you.
Its principal strength is useful compatibility without requiring a console-specific adapter brick. The listed specifications identify an 18 AWG non-polarized two-prong cord rated for 125V AC and 7A maximum. The four-foot length is short compared with many replacement leads, but it may be sufficient for a console positioned close to a wall outlet or under a television stand.
The important limitation appears in the compatibility warning. This cord is not suitable for the PS4 Pro, original PS3 Fat, Xbox 360 variants, or several other systems. It also requires the device to have a matching C7 figure-eight inlet rather than a connector attached to a larger external power brick.
This is a strong choice for a standard PS4 or PS4 Slim setup, especially when one replacement cord may also serve other household electronics. Buyers should inspect the console’s power inlet and measure the available route before ordering. Those who need a longer cable or are restoring a PS4 Pro should choose one of the more specialized options instead.
Useful Multi-Device Compatibility
Beyond supported PlayStation and Xbox models, the C7 format is common among televisions, printers, speakers, and monitors. That makes this cord useful for consolidating spares, provided each device has the matching non-polarized figure-eight inlet.
Safety and Conductor Details
The listed ETL certification, 18 AWG copper core, 125V rating, and 7A maximum give shoppers useful technical information. Confirming those figures against the power supply label helps prevent a mismatch.
We may earn a commission when you buy through this link, at no additional cost to you.
2. Five-Foot Universal AC Cord – Best Practical Budget Replacement
Five-Foot Universal AC Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
Five-foot cable length
The Five-Foot Universal AC Cord combines broad console compatibility with a practical length for entertainment centers. Rated 4.7, it is designed for PS5, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, and several Xbox One and Xbox Series models. It also supports LED televisions, monitors, sound bars, and printers that use a two-slot figure-eight inlet.
Pros
- Practical five-foot length
- Wide console compatibility
- Thickened PVC jacket
- Passed bend testing
- Copper-core wiring
Cons
- Original PS3 Fat unsupported
- No stated safety certification
We may earn a commission when you buy through this link, at no additional cost to you.
Its 18 AWG copper-core construction and thickened PVC jacket are the main physical selling points. The stated 125V and 7A rating align with common low-power AC equipment, while a reported testing process of more than 1,000 bends suggests attention to routine flexing. The five-foot lead offers more placement flexibility than a very short desktop cable.
There is no stated UL or ETL certification in the supplied product information, which is worth considering when comparing safety credentials. The product also excludes the original PS3 Fat model. Most importantly, it is a cord rather than a complete AC adapter and cannot replace a console’s external power supply brick.
The Five-Foot Universal AC Cord is an appealing choice for buyers seeking a straightforward replacement with a little extra reach. It is best suited to standard C7-equipped PS4 systems and other compatible devices. Check the shape of the console’s inlet and the power-brick label before purchase, especially if compatibility with unusual equipment matters.
Length Suits Typical Gaming Areas
Five feet provides more freedom than a compact three- or four-foot lead while remaining manageable behind a television cabinet. It can reach around furniture or toward an outlet mounted farther along the wall.
Flexing-Focused Construction
The thickened PVC jacket and stated bend testing address a common weak point in replacement power leads. Frequent handling near the console inlet remains the area where careful placement can help extend useful life.
We may earn a commission when you buy through this link, at no additional cost to you.
3. PS4 Pro C17 Power Cord – Best for Specific Power-Brick Models
PS4 Pro C17 Power Cord
C17 appliance connector
125 volts, 10 amps
18 AWG power cord
Six-foot UL-listed cord
This UL-listed replacement addresses a less common but important PS4 Pro configuration. It uses an IEC 320 C17 connector and is compatible with older PS4 Pro models CUH-7015 and CUH-7115, as well as the power bricks associated with original Xbox One and several Xbox 360 models. Its 4.7 rating reflects a focused fit for those systems.
Pros
- Supports older PS4 Pro models
- Higher 10A current rating
- Six-foot cable length
- UL-listed construction
- Also supports Xbox bricks
Cons
- Excludes CUH-7200 PS4 Pro
- Not compatible with C7 cords
We may earn a commission when you buy through this link, at no additional cost to you.
The cable is rated for 125V and 10A, which distinguishes it from the 7A figure-eight options in this guide. It also provides six feet of length, giving users room to route the cord between an external power brick and a wall outlet. That makes it practical where a compact cable would create unnecessary tension.
Compatibility is model-specific and deserves close attention. The listing explicitly says the cable does not fit PS4 Pro models from the CUH-7200 series. It also cannot replace a standard C7 figure-eight cord. The correct process is to compare the connector on the existing power brick with the illustrated C17 shape before ordering.
This is the most relevant choice in the roundup for an owner of an older CUH-7015 or CUH-7115 PS4 Pro who has lost the wall-side cord from the power brick. It is less versatile than the universal C7 selections, but that specialization makes it more appropriate when the connector matches.
Purpose-Built for External Bricks
This product replaces the cord between the wall outlet and a compatible power brick rather than plugging directly into a console. Its higher current rating aligns with the listed power-brick applications.
Model Numbers Prevent Mismatches
The explicit CUH-7015 and CUH-7115 support, followed by the CUH-7200 exclusion, provides unusually clear guidance. Use the console label and connector shape together before choosing this specialized cable.
We may earn a commission when you buy through this link, at no additional cost to you.
4. Mustpoint Four-Pin Connector – Best for a Specific Inline Repair
Mustpoint Four-Pin Connector
Four-pin inline connector
65-millimeter component
CUH-1115A compatible
ADP-240CR compatible
The Mustpoint Power Supply Cable Connector is not a complete wall-to-console cord. It is a 65-millimeter, four-pin inline component associated with Sony PS4 CUH-1115A systems and the ADP-240CR power supply. This specialized repair part carries a 3.8 rating and is best considered only when the existing four-pin section has failed.
Pros
- Targeted PS4 compatibility
- Specific model references
- Compact replacement component
- Straightforward installation
Cons
- Narrower compatibility than cords
- Lower rating than alternatives
- Requires four-pin setup
We may earn a commission when you buy through this link, at no additional cost to you.
The primary advantage is precise targeting. Listing the console model and power-supply reference helps buyers avoid confusing this connector with a conventional AC lead. Because the package contains one four-pin connector, the repair is intended for a specific connection rather than a complete cable replacement.
Its limitations are substantial compared with the other products here. It will not serve as a general replacement for a PS4 Slim power lead, a PS4 Pro brick cord, or a figure-eight device cable. The lower 3.8 rating also gives buyers less favorable feedback overall, making careful model verification essential.
Choose this connector only when the equipment label confirms CUH-1115A and the failed section uses the stated four-pin arrangement. Owners seeking a plug-and-play cable for a standard PS4 should select a C7 option instead. This part solves one narrow hardware scenario rather than serving as a general console accessory.
A Component Rather Than Cable
The product replaces one inline section of a compatible power-supply assembly. It should not be treated as a substitute for the full wall-side power cord used with other PS4 configurations.
Verify Every Hardware Reference
The CUH-1115A and ADP-240CR references are essential identifying details. A visual comparison of the damaged connector helps prevent an incompatible purchase.
We may earn a commission when you buy through this link, at no additional cost to you.
5. TPLTECH Universal Figure-8 Cord – Best for Multi-Console Households
TPLTECH Universal Figure-8 Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
UL-listed power cord
The TPLTECH AC Power Cord is a highly versatile figure-eight replacement with a 4.8 rating. It supports PS5, PS5 Slim, PS5 Pro, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, Xbox Series S, Xbox Series X, Xbox One S, and Xbox One X. That extensive list makes it attractive for households owning more than one compatible console.
Pros
- Highest group compatibility
- UL safety certification
- Copper-wire construction
- Works across console generations
- Also fits household devices
Cons
- No stated cable length
- Not for PS4 Pro systems
We may earn a commission when you buy through this link, at no additional cost to you.
Safety and construction details are clearly stated. The cord is UL listed, uses a pure copper wire core, and has a heavy-duty flame-retardant jacket designed to resist bending and daily wear. Its electrical specification is 125V and 7A with an 18 AWG gauge, matching the requirements of many standard two-prong figure-eight devices.
The one notable uncertainty is length. The supplied product information does not state a measurement, so shoppers should examine the listing images and physical specifications before ordering. It also should not be assumed to support the PS4 Pro, whose relevant power-brick connector differs from the standard C7 format.
This TPLTECH cord is a strong all-around choice for standard PS4 owners who want one spare capable of serving several current consoles and household electronics. Its broad compatibility and stated UL certification distinguish it from many generic replacements, while the lack of a stated length is the primary point to confirm.
One Spare, Multiple Systems
Compatibility across PS5, PS4, PS3 Slim, and current Xbox families is especially valuable for shared gaming rooms. A matching C7 device can use the same replacement without an adapter brick.
Durability Without Exaggeration
The listed copper core, flame-retardant jacket, and bending resistance support everyday use. Routine care still matters because repeated sharp bends near either plug can stress any replacement lead.
We may earn a commission when you buy through this link, at no additional cost to you.
6. PlayStation VR 12V Adapter – Best for Powered VR Accessories
PlayStation VR 12V Adapter
12-volt DC output
Three-amp current rating
36-watt maximum output
Wide-range AC input
The 12V 3A AC Adapter for Sony PlayStation VR is a complete power solution for VR processor units and compatible Sony accessories rather than a conventional console lead. Its 4.8 rating and feature-rich construction make it the specialized premium pick for PS4 users whose PlayStation VR power adapter has failed.
Pros
- Complete AC adapter
- Stable 36-watt output
- Built-in fault protection
- Supports multiple PSVR units
- Broad Sony device compatibility
Cons
- Not a console power cord
- Requires 12-volt device
We may earn a commission when you buy through this link, at no additional cost to you.
The adapter accepts 100–240V AC input at 50/60Hz and delivers a regulated 12V DC output at 3A, or 36W. Listed replacement references include CUH-ZAC1, ADP-36NH A, CUH-ZVR2, CUH-ZVR1, and SQN36W12P-04. It can also serve compatible Sony wireless headphones and 4K Blu-ray players requiring the same 12V 3A output.
Unlike a simple cord, this product includes built-in protection against overvoltage, overcurrent, and short circuits. Those safeguards and the stable output make it relevant during long gaming sessions. The important caveat is that it cannot replace the AC input cord for a PS4 console or PS4 power brick.
This adapter is best for owners of a PlayStation VR processor unit or another supported 12V 3A Sony device. Match the device’s required output and connector before purchasing. If the goal is to replace a damaged PS4 console lead, choose a C7 or C17 cord from the guide instead.
Complete Adapter in One Package
The unit includes the AC-to-DC conversion required by compatible VR processor units. This makes it a broader solution than a replacement wall lead because it restores the specified 12V output.
Protection for Long Sessions
Listed overvoltage, overcurrent, and short-circuit protection provide useful safeguards for high-use gaming sessions. The stated stable 36W output also distinguishes it from lower-powered alternatives.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Two-Pack Figure-8 Power Cords – Best for Keeping Multiple Spares
Two-Pack Figure-8 Power Cords
C7 figure-eight connector
Two five-foot cords
18 AWG reinforced wire
Non-polarized two-prong plugs
The Two-Pack Figure-8 Power Cords include two five-foot AC leads, making them a convenient choice for households that want a primary replacement and a backup. The product has a 4.8 rating and supports PS5, PS4, PS4 Slim, PS3 Slim, Xbox Series S, Xbox Series X, Xbox One S, and Xbox One X.
Pros
- Two cords included
- Five-foot practical length
- Broad figure-eight compatibility
- Reinforced 18 AWG construction
- Supports several console families
Cons
- Original Xbox One unsupported
- Not for original PS3 Fat
We may earn a commission when you buy through this link, at no additional cost to you.
Both cords use the IEC 320 C7 figure-eight connector and a non-polarized two-prong plug. Their 18 AWG construction is described as durable and tested for thousands of bends. A five-foot length offers practical reach for entertainment centers, while the pack can also serve compatible televisions, monitors, sound bars, and printers.
The compatibility notes contain two meaningful exclusions. Original PS3 Fat is unsupported, and the original Xbox One requires a power supply brick rather than a direct figure-eight connection. The product is therefore versatile for modern consoles but not every historical PlayStation or Xbox design.
This two-pack is a strong option for owners of multiple C7-equipped consoles or for anyone who wants spare cords for travel and entertainment components. It offers better practical value than buying separate replacements one at a time, while retaining the same plug-and-play simplicity.
A Ready Spare Strategy
Keeping one cord in service and another nearby reduces downtime after a damaged lead is discovered. The second cable can also serve another compatible household device.
Balanced Length and Flexibility
Five feet is long enough for many entertainment-center arrangements without becoming difficult to manage. It is a versatile compromise for consoles and nearby electronics.
We may earn a commission when you buy through this link, at no additional cost to you.
8. Six-Foot UL-Certified Cord – Best Overall Replacement for Standard PS4
Six-Foot UL-Certified Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
Six-foot UL-certified cord
The Six-Foot UL-Certified Cord is the strongest all-around choice for a standard PS4 setup, combining the guide’s highest product rating of 4.9 with broad compatibility and useful length. It supports PS5, PS5 Slim, PS5 Pro, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, Xbox Series S, Xbox Series X, Xbox One S, Xbox One X, and other C7-equipped devices.
Pros
- Highest product rating
- Six-foot extended length
- UL-certified safety standard
- Broad console compatibility
- Copper conductor construction
Cons
- No PS4 Pro compatibility
- Long cord may need tidying
We may earn a commission when you buy through this link, at no additional cost to you.
Its six-foot length is a practical advantage when an outlet is located behind a television cabinet, desk, or counter. The listed construction uses 18 AWG two-conductor copper wire rated for 125V, 50–60Hz, and 7A. A non-polarized NEMA 1-15P wall plug connects directly to a standard US outlet without requiring a separate adapter.
UL certification adds a meaningful point of confidence, and the listed File No. E484264 gives shoppers a reference beyond a vague claim of quality. However, the product remains a C7 figure-eight cord and does not serve the PS4 Pro’s distinct power-brick configuration. Buyers should also consider whether six feet creates excess slack in a tightly arranged station.
For most standard PS4 and PS4 Slim owners, this is the most balanced recommendation in the roundup. It combines strong feedback, a safety certification, broad device support, and a practical length. Confirm the figure-eight inlet and consult the console power-supply label before installation.
Reach Without an Extension
A six-foot lead can bridge a reasonable distance between the console and an outlet. That reduces the need for extension cords, which can add avoidable clutter to a gaming setup.
Verified Safety Credentials
The stated UL certification and file number provide concrete details that shoppers can compare with other listings. Its copper-wire construction and defined current rating further improve specification transparency.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Superer Six-Foot TV Cord – Best for Mixed Console and TV Use
Superer Six-Foot TV Cord
C7 figure-eight connector
125 volts, 7 amps
18 AWG copper wire
Six-foot ETL cord
The Superer Six-Foot TV Cord is designed for buyers who need one replacement around a mixed entertainment setup rather than a console-only accessory. It has a 4.7 rating and works with PS5, PS5 Slim, PS4, PS4 Slim, PS3 Slim, PS3 Super Slim, and several Xbox models.
Pros
- Six-foot cable length
- ETL safety certification
- Works with many TV brands
- Supports multiple console families
- Includes warranty coverage
Cons
- Not for PS4 Pro
- Only works with matching ports
We may earn a commission when you buy through this link, at no additional cost to you.
Its television compatibility is particularly broad, covering compatible Samsung, LG, Hisense, TCL, Sony, Apple, Insignia, Sharp, Panasonic, Toshiba, JVC, Roku, LED, LCD, and HD television products. It can also serve compatible printers, speakers, and monitors. The six-foot length gives it more flexibility than a compact lead behind a media console.
As an ETL-certified 18 AWG non-polarized cord, it provides a stated 125V and 7A maximum rating, along with a copper core and a 24-month manufacturer warranty. Compatibility still depends entirely on a matching C7 inlet. The product is explicitly not suitable for the PS4 Pro, original PS3 Fat, original Xbox One, or Xbox 360 variants.
This Superer cord is a good choice for a PS4 owner who also wants a spare for a television or other figure-eight device. Its six-foot length and multi-brand support make it especially convenient behind a shared entertainment center, while PS4 Pro users should select a more specialized C17 cord.
One Spare for Multiple Screens
The television-brand list makes this cord useful for mixed-device households. A single replacement type can cover a console and several compatible displays when the ports match.
Room to Route Behind Furniture
Six feet allows the cord to pass around entertainment furniture and reach a better-positioned outlet. Secure excess slack to keep the installation neat and away from foot traffic.
We may earn a commission when you buy through this link, at no additional cost to you.
10. Four-Foot PS4 Pro Cord – Best Compact Cord for Older PS4 Pro
Four-Foot PS4 Pro Cord
C17 appliance connector
125 volts, 10 amps
18 AWG power cord
Four-foot UL-listed cord
The Four-Foot PS4 Pro Cord is a compact UL-listed replacement for owners of specific older PS4 Pro models. Its 4.7 rating and stated compatibility with CUH-7015 and CUH-7115 make it relevant for restoring the wall-side connection associated with an external power supply.
Pros
- Targets older PS4 Pro models
- UL safety certification
- Higher 10A current rating
- Compact four-foot length
- Supports Xbox power bricks
Cons
- Excludes CUH-7200 series
- Shorter than similar PS4 Pro cord
We may earn a commission when you buy through this link, at no additional cost to you.
It uses an IEC 320 C17 to NEMA 1-15P connector configuration and is rated for 125V and 10A with 18 AWG wire. The four-foot length can be convenient when the power brick sits close to an outlet. It also lists compatibility with power bricks for original Xbox One and several Xbox 360 variants.
The essential warning is that it does not fit PS4 Pro models in the CUH-7200 series. Its C17 connector also makes it incompatible with standard figure-eight cords. Because console generations can look similar while using different power hardware, buyers should confirm both the model number and connector before ordering.
This product is a practical choice for an older CUH-7015 or CUH-7115 owner seeking a compact, certified cord. It ranks below the six-foot model because the longer version offers more placement flexibility, but its higher current rating serves the stated power-brick applications well.
Compact Routing Around a Brick
Four feet can be easier to conceal when an external power brick is positioned close to the outlet. It also offers enough reach for many straightforward installations.
C17 Requires Careful Identification
A figure-eight shape and a C17 shape look different at the appliance end. Comparing the existing connector is essential because the CUH-7200 exclusion makes compatibility model-dependent.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best PS4 Replacement Power Adapter Cable
Choosing the correct replacement starts with the connector attached to the console or its power supply, not the product’s broad compatibility claim. Shoppers should then compare voltage, current, wire gauge, certification, length, construction, and the exact hardware model before making a selection.
Identify the Console Connector
Match connector shape before considering length.
Use the existing hardware as the primary reference.
Confirm the PS4 Model
Read the console label before ordering.
Pay special attention to PS4 Pro series numbers.
Check Electrical Ratings
Compare replacement and original specifications.
Use the correct adapter type for the device.
Look for Safety Certification
Prefer recognized safety listings.
Inspect physical construction before use.
Choose the Right Length
Measure the complete connection path.
Balance reach against cable management.
Assess Wire and Jacket Quality
Prioritize 18 AWG copper wiring.
Protect the cable from repeated sharp bends.
Decide Between Cord and Adapter
Determine which part has failed.
Do not substitute adapters across device types.
Consider Household Versatility
Reuse only matching C7 devices.
Balance versatility with exact fit.
How to Use and Care for Your PS4 Replacement Power Adapter Cable
Before installation, switch off and fully unplug the PS4 or its external power supply. Compare the replacement connector with the original inlet, verify the model and electrical ratings, and inspect both ends for damage. If the console uses a brick, unplug the brick from the wall and disconnect the existing lead before attaching the replacement.
Route the cord so it does not run under rugs, pinch behind furniture, or hang where it can be pulled. Leave a small amount of slack at the connector, but avoid looping excess cable tightly around the plug. Connect the appliance end fully and keep fingers away from exposed metal. For products designed for a standard US outlet, plug the NEMA 1-15P end into a grounded wall receptacle without forcing it.
For safety, stop using the cable if the jacket cracks, the plug becomes loose, discoloration appears, or the connector becomes unusually hot. Do not use extension arrangements that exceed the cord’s electrical rating, and avoid using a C7 cord where a C17 or specialized adapter is required. Store an unused spare loosely in a dry place rather than wrapping it tightly around itself.
Frequently Asked Questions
What kind of power cord does a standard PS4 use?
A standard PS4 or PS4 Slim commonly uses a non-polarized two-prong figure-eight power cord with an IEC 60320 C7 connector. The exact arrangement can vary between the console and an external power supply, so inspect the original inlet and compare the shape before purchasing. A C7 cord is not interchangeable with the C17 connector used by the listed older PS4 Pro configurations.
Can I use a PS5 power cord for a PS4?
Many supported PS5 replacement cords in this guide also fit standard PS4 and PS4 Slim systems because they use the same C7 figure-eight format. Compatibility still depends on the connector and the power-supply requirements of the specific console. PS4 Pro systems need separate model verification because their relevant connector differs from the standard C7 arrangement.
Will a universal figure-eight cord damage my PS4?
A correctly rated and properly connected cord should not damage a compatible console. Look for the expected voltage, current capacity, connector shape, and safety certification, and follow the original power-supply guidance. The presence of a universal compatibility list is not enough if the device uses a different connector or requires a separate AC-to-DC adapter.
What is the difference between C7 and C17 connectors?
A C7 connector is the small figure-eight shape commonly used by many standard PlayStation and Xbox systems, televisions, and household electronics. A C17 connector has a different appliance-end configuration and appears on the external power-brick applications covered by the specialized PS4 Pro options. Because the two ends can look similar at a glance, measure or compare the original connector rather than relying only on the product title.
Are the PS4 Pro replacement cords in this guide universal?
No. The two C17 cords are intended for listed older PS4 Pro models, including CUH-7015 and CUH-7115, and they explicitly do not support the CUH-7200 series. They also cannot replace a standard figure-eight cord. Check the console model, the connector on the power brick, and the original cord’s shape before ordering.
Does the PlayStation VR adapter replace a PS4 power cord?
No. The PlayStation VR product is a complete 12V, 3A AC-to-DC adapter for compatible VR processor units and certain Sony accessories. A PS4 console or its external power supply requires its own appropriately shaped and rated cord. This adapter is appropriate only when the connected device specifies compatible 12V 3A power and the connector fits.
Is a longer replacement power cord better for a PS4?
A longer cord is useful when the outlet is distant or the console sits behind furniture, but unnecessary extra length can create clutter. Four feet works for close installations, while five or six feet provides more routing flexibility. Measure the intended path and select a length that reaches comfortably without leaving the cable under strain or creating a trip hazard.
How can I tell if a replacement PS4 cord is safe?
Look for a recognized safety certification such as UL or ETL, along with clear voltage, current, and conductor specifications. Inspect the plug and insulation for damage, and make sure the connector and ratings match the console’s original power supply. Certification improves confidence in construction, but it does not replace the separate requirement of correct device compatibility.
Final Thoughts on Choosing the Best PS4 Replacement Power Adapter Cable
The Six-Foot UL-Certified Cord is the strongest general recommendation because it combines a 4.9 rating, broad console support, copper-wire construction, recognized safety certification, and a useful length. The Five-Foot Universal AC Cord is a practical budget-oriented alternative, while the PlayStation VR 12V adapter stands apart as the specialized premium choice for compatible VR hardware.
For most PS4 and PS4 Slim owners, prioritize the connector first and choose between C7 options according to length, certification, and how many other devices the cord might serve. Owners of older CUH-7015 or CUH-7115 PS4 Pro systems should look for the C17 power-brick cord, while the CUH-7200 series requires a different match. The four-pin Mustpoint part is only appropriate for the specific inline repair it supports.
Before buying, inspect the existing connector, read the console and power-supply labels, and confirm that the replacement’s voltage and current information are suitable. Current prices, product variants, and availability can change, so check the latest listing and images before placing an order. The safest purchase is one that fits both physically and electrically, not simply one whose title mentions PS4.