5ft Right Angle Figure 8 TV Cord
4.7Editor score
Compact five-foot cable length
Right-angle Figure 8 connector
Broad two-prong device compatibility
In this guide
Right angle power cords solve a frustratingly common TV installation problem: a recessed power inlet that cannot accept a straight connector without leaving the cable sharply bent. An L-shaped plug can improve clearance behind wall-mounted displays, inside entertainment centers, and beside tightly positioned furniture while creating a cleaner and more manageable cable route.
The products in this guide were compared using connector configuration, cable length, right-angle orientation, strain relief, safety certification, compatibility information, and practical installation considerations. The list includes two-prong Figure 8 and IEC C7 cords for many flat-screen TVs, along with three-prong IEC C13 options for computers, monitors, and some larger televisions.
Each review identifies the strongest use case and important tradeoffs without assuming every connector is interchangeable. The best choice depends primarily on the inlet on your television, the distance to the wall outlet, and the amount of clearance behind the screen. Prices and product availability can change, so confirm the specifications and current listing details before purchasing.
Top 3 Picks for Best Right Angle Power Cords for TV
Ancable 6FT Right Angle C7 TV Power Cord
4.8Editor score
Right-angle IEC C7 connector
Six-foot non-polarized cable
UL-listed for added assurance
Superer 10FT L-Shaped TV Power Cord
4.8Editor score
ETL-certified ten-foot cable
L-shaped two-prong connector
Copper core and strain relief
Top 10 Best Right Angle Power Cords for TV in 2026 Compared
This side-by-side comparison highlights each cable's connector, length, orientation, and intended equipment so you can quickly identify the right angle power cord that matches your television and installation.
ProductsSpecificationsEditor scorePrice
Best Budget
10ft Right Angle Figure 8 Cord
10-foot cable length
Two-prong Figure 8
Right-angle C7 connector
Non-polarized connection
4.7Editor score
Editor's Choice
Ancable 6FT Right Angle C7 Cord
6-foot cable length
18 AWG conductors
UL-listed C7 connector
Non-polarized two-prong plug
4.8Editor score
Best Budget
5ft Right Angle Figure 8 Cord
5-foot cable length
Two-prong Figure 8
Right-angle C7 connector
Non-polarized connection
4.7Editor score
5ft Right Angle C13 Cord
5-foot cable length
Three-prong IEC C13
Right-angle NEMA plug
Grounded device connection
4.4Editor score
Superer 10FT L-Shaped Cord
10-foot cable length
18 AWG conductors
ETL-certified cable
L-shaped C7 connector
4.8Editor score
CableCreation 10-Foot C7 Cord
10-foot cable length
Two-prong C7 connector
UL and CSA listed
7A 125V rating
4.8Editor score
Superer 6FT L-Shaped Cord
6-foot cable length
18 AWG conductors
ETL-certified cable
L-shaped C7 connector
4.8Editor score
C2G 6FT Right Angle Cord
6-foot cable length
Three-prong female connector
Right-angle NEMA plug
Fully molded construction
4.7Editor score
Two-Pack 2FT Figure 8 Cords
Two-foot cable length
Two-prong Figure 8
ETL-listed SPT-2 cable
Pure copper conductors
4.6Editor score
12FT Right Angle C7 Cord
12-foot cable length
18 AWG conductors
Downward-angle C7 connector
UL-listed construction
4.7Editor score
1. Ancable 6FT Right Angle C7 Cord – Best Overall Right Angle Power Cords for TV
Ancable 6FT Right Angle C7 Cord
Six-foot non-polarized cable
Right-angle IEC C7
18 AWG conductor
UL-listed construction
The Ancable 6FT Right Angle C7 cord stands out as the most balanced option in this guide, earning a 4.8 customer rating for its combination of clear specifications, useful length, and wall-friendly connector design. It uses an IEC 60320 C7 Figure 8 female connector and a non-polarized NEMA 1-15P wall plug, making it a common replacement for compatible flat-screen televisions and other consumer electronics.
Pros
- Strong compatibility guidance
- Useful six-foot length
- UL-listed construction
- Clear connector specifications
- Supports slimmer wall-mounted TVs
Cons
- Not suitable for three-prong inlets
- Not compatible with every TV model
We may earn a commission when you buy through this link, at no additional cost to you.
Its 90-degree L-shaped end is the central benefit. Instead of projecting directly toward the wall, the plug can sit closer to the television's power inlet, reducing the need to force the cable into a sharp bend. The six-foot length offers enough reach for many entertainment centers while avoiding the excess slack that can make a longer cable harder to conceal. The listed 18 AWG rating, 125V 10A specification, and UL listing also provide useful purchasing confidence.
Compatibility information is unusually helpful for a replacement cable. The product is listed for many Samsung, LG, TCL, Apple, Sony, Insignia, Sharp, and Toshiba televisions, along with certain printers, scanners, and related devices. That breadth should not be interpreted as universal fit, however. The television must have the matching two-slot Figure 8 inlet, and the manufacturer can offer helpful confirmation if you provide a clear photo of the inlet or original connector.
This is a strong recommendation for someone replacing a short, damaged, or inconvenient right-angle TV cord without needing an unusually long run. It is also a sensible choice for a wall-mounted television with limited rear clearance. The main limitation is simple: it is a two-prong cable and cannot replace a three-prong power lead. Verify the inlet and connector shape before ordering, and do not assume a TV brand name guarantees compatibility.
Space-Saving Connection
The angled C7 connector is designed to reduce sharp cable bending behind slim televisions. It can also allow the display to sit closer to the wall, making the installation look neater without overextending the cable.
Verification Before Purchase
The seller recommends checking the required cable type and length before ordering. Sending photos of the TV's power inlet or original connector is a practical way to confirm that the IEC C7 shape is correct.
We may earn a commission when you buy through this link, at no additional cost to you.
2. 10ft Right Angle Figure 8 Cord – Best Long-Reach Two-Prong Option
10ft Right Angle Figure 8 Cord
Ten-foot cable length
IEC C7 Figure 8
Non-polarized two-prong plug
Right-angle L-shaped connector
This 10-foot right angle power cord received a 4.7 customer rating and offers a generous amount of reach for televisions positioned farther from their outlets. Its IEC 60320 C7 Figure 8 connector and NEMA 1-15P plug follow the familiar two-prong format used by many TVs, game consoles, monitors, and compact electronics. The extended cable gives installers more freedom when routing power around furniture or along a wall.
Pros
- Generous ten-foot reach
- Simple right-angle design
- Broad device compatibility
- Molded connector construction
- Useful for recessed inputs
Cons
- Longer length may leave excess slack
- Two-prong design excludes C13 devices
We may earn a commission when you buy through this link, at no additional cost to you.
The principal advantage over shorter alternatives is placement flexibility. Ten feet is often enough to connect a wall-mounted television to an outlet several feet away without extending the cord sharply or joining unrelated length with an adapter. Its right-angle end reduces the space occupied by the plug, while the listed precision-molded connectors are designed to maintain a secure connection in the television's recessed inlet.
The product is listed as compatible with TVs, PS5, PS4, and Xbox Series S/X devices that accept the same two-slot Figure 8 connector. Buyers should still verify the inlet rather than relying on device category. The cable is non-polarized, so it is not designed for grounded three-prong equipment, and its extended length may not be ideal where excess cable would remain visible behind a compact stand.
Choose this option when both clearance and reach matter. It is particularly attractive for larger screens mounted slightly away from the wall, gaming displays positioned in entertainment centers, and setups where a six-foot cord would create strain. It is less compelling for a tightly organized desk or a TV installed directly beside its outlet, where the shorter options in this guide may be easier to manage.
Flexible Television Placement
The ten-foot run gives a wall-mounted display more freedom to sit away from an outlet or around a mounting bracket. That extra reach can reduce cable tension and make the final position easier to adjust.
Molded Connection
Precision-molded connectors are intended to fit securely and resist accidental disconnection. Confirm that the right-angle end is oriented in the direction your television's inlet requires before installation.
We may earn a commission when you buy through this link, at no additional cost to you.
3. 5ft Right Angle Figure 8 Cord – Best Budget Right Angle Power Cords for TV
5ft Right Angle Figure 8 Cord
Five-foot cable length
IEC C7 Figure 8
Right-angle L-shaped connector
Non-polarized two-prong plug
The 5ft right angle Figure 8 cable provides a focused, economical solution for televisions with a nearby outlet. It holds a 4.7 customer rating and shares the same basic IEC C7 to NEMA 1-15P configuration as many other popular two-prong TV power leads. Its right-angle end helps the connector fit close to a recessed power port without sharply folding the cable.
Pros
- Compact and easy to conceal
- Short cable suits nearby outlets
- Wide TV compatibility
- Simple right-angle installation
- Works with several device types
Cons
- May be too short for some mounts
- Limited to compatible two-prong inlets
We may earn a commission when you buy through this link, at no additional cost to you.
A five-foot length is the most important differentiator. It can be ideal for a TV on a stand, a compact apartment entertainment center, or a wall mount with an outlet immediately below or nearby. Shorter cable is easier to hide because there is less slack to loop behind the screen. Precision-molded connectors are also listed, helping the plug seat firmly in devices that use a two-slot Figure 8 inlet.
The stated compatibility covers a broad selection of television brands, including Samsung, LG, TCL, Hisense, Sony, Vizio, Insignia, Sharp, and Toshiba. The same two-prong format is also commonly used by game consoles and other accessories. Brand compatibility still depends on the physical inlet, so inspect the original cord or television before buying. This product will not fit a three-slot IEC C13 power connection.
This is the best value-oriented choice for a straightforward replacement where the outlet is within five feet of the television. It also works well for users who dislike long coils of cable behind furniture. The trade-off is obvious: if the television sits farther from the outlet, the five-foot length may pull taut or require a less convenient route. Measure the actual distance and allow a little slack before selecting it.
Less Visible Cable Slack
A shorter lead is easier to conceal behind compact stands and entertainment furniture. It is particularly useful where cable-management accessories would be visually distracting.
Common Two-Prong Format
The IEC C7 Figure 8 connection appears on many televisions and game consoles. Check for the familiar two-slot shape and compare it with the connector in the listing image.
We may earn a commission when you buy through this link, at no additional cost to you.
4. 5ft Right Angle C13 Cord – Best Grounded Right-Angle Option
5ft Right Angle C13 Cord
Five-foot cable length
Three-prong IEC C13
Right-angle NEMA 5-15P
Grounded device connection
This 5ft C13 right-angle cord fills an important niche for televisions and displays that use a three-prong grounded connection. It has a 4.4 customer rating and uses a right-angle IEC C13 female connector paired with a standard NEMA 5-15P wall plug. The result is a practical replacement for compatible computers, monitors, TVs, printers, and other equipment.
Pros
- Fits three-prong equipment
- Useful for computers and monitors
- Right-angle clearance benefit
- Ample reach for nearby outlets
- Single-cord package
Cons
- Lower customer rating
- Not compatible with C7 inlets
We may earn a commission when you buy through this link, at no additional cost to you.
The angled connector provides the same space-saving benefit associated with right-angle television cords, but in a three-pin format. It can sit closer to a wall-mounted screen or fit within a crowded entertainment cabinet without forcing the cable into a severe bend. The five-foot length is described as ample for home offices, gaming areas, and common media-furniture arrangements, giving the user enough slack without making the cable unnecessarily long.
Its main limitation is compatibility. The three-prong IEC C13 inlet is visibly larger than the two-slot Figure 8 inlet used by many modern televisions and game consoles. You cannot safely substitute this cable for a C7 model, and the wall plug is correspondingly larger. The 4.4 rating is respectable but lower than the leading products in this guide, so the listing's exact construction and connector details deserve a careful look.
Buy this cable if your equipment has a three-slot C13 inlet and you need a right-angle connection. It can be especially useful for a computer monitor mounted close to a wall or a larger display with a grounded power input. Do not choose it merely because a TV is three-prong compatible in general; verify that the actual inlet matches the IEC C13 shape shown in the product image.
Grounded Three-Pin Connection
This option is intended for equipment that accepts an IEC C13 shrouded female connector. The grounded format distinguishes it from the smaller two-prong C7 cords that dominate the rest of the list.
Compact Gaming-Style Setup
The five-foot length and angled C13 end suit desks and entertainment centers with nearby outlets. It helps reduce crowding while preserving enough reach for normal placement.
We may earn a commission when you buy through this link, at no additional cost to you.
5. Superer 10FT L-Shaped Cord – Best Premium Long-Reach Cord
Superer 10FT L-Shaped Cord
Ten-foot cable length
18 AWG conductors
ETL-certified power cord
L-shaped IEC C7 connector
The Superer 10FT L-Shaped cord earns a 4.8 customer rating and is the most feature-focused premium replacement in the guide. It combines a 90-degree IEC C7 connector, an 18 AWG pure copper core, a ten-foot length, ETL certification, strain relief, and a 24-month manufacturer warranty. Those details make it a strong choice for buyers who value documented construction and long-term support.
Pros
- ETL-certified construction
- Pure copper core
- Ten-foot installation reach
- Wide television compatibility
- 24-month manufacturer warranty
Cons
- Not compatible with three-prong devices
- Ten feet may be unnecessarily long
We may earn a commission when you buy through this link, at no additional cost to you.
Its right-angle design is tailored to wall-mounted TVs and other installations where a conventional plug would occupy too much rear space. The L-shaped end reduces sharp bending and keeps the cable route more orderly. The ten-foot length is useful when the outlet is not directly behind the television, while the pure copper core is listed to support stable power delivery and dependable durability.
The product is compatible with many Samsung, LG, Hisense, TCL, Sony, Apple, Insignia, Sharp, Panasonic, Toshiba, JVC, and Roku television models. It can also serve compatible projectors, game consoles, printers, and speakers. The specification is a non-polarized two-prong Figure 8 cord rated for 125V AC and 7A maximum. It explicitly does not fit three-prong devices, and buyers are advised to check the connector, port orientation, clearance, and length.
This premium pick is best for a long installation where certification, warranty coverage, and construction details matter. It may be less practical for a compact setup with a nearby outlet, where ten feet introduces unnecessary slack. It is also important to note that the long warranty does not remove the need to verify connector compatibility; checking the original cord remains the most reliable way to prevent an incorrect purchase.
Documented Safety and Construction
ETL certification and an 18 AWG pure copper core provide more specification detail than many competing listings. The stated 125V AC and 7A maximum rating also helps buyers assess whether the cord suits the intended device.
Reduced Strain at the Inlet
The L-shaped plug and added strain relief are intended to reduce sharp flexing where the cable enters the television. This can help keep the connection neater and less vulnerable to repeated bending.
We may earn a commission when you buy through this link, at no additional cost to you.
6. CableCreation 10-Foot C7 Cord – Best Certified Two-Prong Replacement
CableCreation 10-Foot C7 Cord
Ten-foot cable length
UL and CSA listed
18 AWG two-conductor cord
7A 125V rating
CableCreation's 10-foot C7 cord has a 4.8 customer rating and stands out for dual UL and CSA certification, a fully molded design, and clearly stated electrical ratings. It replaces a conventional IEC C7 to NEMA 1-15P lead with a 90-degree figure 8 connector, offering more clearance behind compatible TVs and other devices.
Pros
- Dual safety certification
- Long ten-foot cable
- Fully molded construction
- Broad equipment compatibility
- 24-month warranty and support
Cons
- May be deeper than original Sonos lead
- Cannot fit three-prong inlets
We may earn a commission when you buy through this link, at no additional cost to you.
The cord is listed for a broad mix of Samsung, LG, TCL, and Apple televisions, plus scanners, printers, projectors, computers, powered speakers, sound bars, and several PlayStation and Xbox models. Its ten-foot length offers generous reach, and the 18 AWG construction is rated to carry 7A at 125V or 2.5A at 250V. The fully molded connectors are designed for durability, while the 24-month warranty and lifetime technical support add reassurance.
One compatibility caveat deserves attention. The plug can fit a Sonos Play 1 speaker, but it is deeper than the original cable, so it may not sit properly on a table. That illustrates an important general point: a connector can physically fit while changing the available space around a device. Similar concerns can apply to compact projectors, sound bars, and televisions with unusually shallow inlets.
This is an excellent choice for a compatible television that needs a long, certified replacement cord. It is especially compelling when both UL and CSA listings are important to the buyer, although the Superer offers an ETL listing, pure copper specification, and similar warranty coverage. Verify the depth and orientation of the C7 inlet before using the cable with a shallow-fitting speaker or compact device.
Recognized Safety Listings
Being listed by both UL and CSA provides clear third-party certification information for shoppers. The molded construction is also designed to resist wear and maintain a dependable connection.
Check Device Depth
The C7 plug can fit some speakers but may project farther than the original lead. Compare connector depth and nearby furniture before installation to avoid creating new clearance problems.
We may earn a commission when you buy through this link, at no additional cost to you.
7. Superer 6FT L-Shaped Cord – Best Certified Six-Foot Option
Superer 6FT L-Shaped Cord
Six-foot cable length
18 AWG conductors
ETL-certified power cord
L-shaped IEC C7 connector
The Superer 6FT L-Shaped cord combines the clean proportions of a six-foot cable with the same right-angle construction, ETL certification, and 24-month warranty offered by its longer sibling. Its 4.8 customer rating reflects a well-liked product that suits many television installations where both organized routing and moderate reach are important.
Pros
- ETL-certified construction
- Balanced six-foot length
- Pure copper core
- Strain-relief design
- 24-month manufacturer warranty
Cons
- Only works with two-prong inlets
- Requires connector and clearance verification
We may earn a commission when you buy through this link, at no additional cost to you.
The L-shaped IEC 60320 C7 connector is designed to sit close to the wall, particularly behind slim wall-mounted TVs with side- or downward-facing power ports. Strain relief helps protect the cable where it enters the plug, while the listed pure copper core supports consistent delivery. The cord is rated for 125V AC and 7A maximum and uses 18 AWG wiring.
Its compatibility list includes Samsung, LG, Hisense, TCL, Sony, Apple, Insignia, Sharp, Panasonic, Toshiba, JVC, and Roku televisions, along with projectors, game consoles, printers, and speakers. As always, the television must actually have a matching two-slot Figure 8 inlet. The listing explicitly warns that the cord is not universal and is unsuitable for three-prong devices, so careful verification remains essential.
This model is an excellent middle-ground choice for TVs mounted near but not directly beside an outlet. Six feet offers enough movement for a bracket and cable routing without creating the amount of slack associated with a ten- or twelve-foot cord. It is also a strong option for anyone who values certification and warranty coverage but does not need a very long run.
Useful Middle Length
Six feet is often long enough for a wall-mounted television and nearby outlet while remaining easy to conceal. It is a practical compromise between short and extended replacement cords.
Wide Brand Compatibility
The listed television coverage is extensive, but connector fit remains the deciding factor. Match the two-slot inlet and confirm that the angled plug has sufficient space around the back panel.
We may earn a commission when you buy through this link, at no additional cost to you.
8. C2G 6FT Right Angle Cord – Best Durable Three-Prong Replacement
C2G 6FT Right Angle Cord
Six-foot cable length
Three-pin female connector
Right-angle grounded plug
Fully molded cable
The C2G 6FT Premium right-angle power cord has a 4.7 customer rating and is a durable option for televisions and other devices that use a three-prong shrouded connector. Its female C13-style connection plugs directly into the equipment, while the angled male end connects to a standard wall outlet. That format differs from the smaller C7 connection used by most two-prong TV cords.
Pros
- Durable molded construction
- Useful six-foot length
- Supports three-prong equipment
- Compatible with many device categories
- Straightforward replacement design
Cons
- Not suitable for C7 figure 8 inlets
- Less detailed electrical specification
We may earn a commission when you buy through this link, at no additional cost to you.
Its most important attribute is the fully molded construction. The listing describes the cable as heavy-duty and emphasizes durability for regular use. The right-angle design also helps it fit into tight areas behind a television, computer, or monitor, while the six-foot length provides enough reach for many furniture arrangements. It can serve as a spare cord as well as a direct replacement.
The product is listed for PCs, monitors, laptops, televisions, printers, scanners, and other devices using a three-pin shroud connector. That broad application makes it useful in a mixed home-office or media setup. However, the listing provides less explicit certification and amperage detail than some competing products, so buyers should review the product page carefully and confirm the physical connector before purchase.
Choose the C2G cable for a compatible three-prong TV, monitor, or computer that needs a durable right-angle replacement. It is less suitable for the two-prong Figure 8 inlets common on many modern televisions. The six-foot length and molded design make it particularly useful where a cord will be plugged in and unplugged regularly or routed within a crowded cabinet.
Fully Molded Durability
The molded cable is designed to withstand regular handling and provide a lasting connection. It is a practical replacement or backup for compatible three-prong equipment.
Useful as a Spare
Keeping a correctly matched spare in a media cabinet or office can make troubleshooting easier. The cable also supports several common categories of computers, displays, and peripherals.
We may earn a commission when you buy through this link, at no additional cost to you.
9. Two-Pack 2FT Figure 8 Cords – Best Compact Two-Cord Set
Two-Pack 2FT Figure 8 Cords
Two-foot cable length
Two-prong Figure 8
ETL-listed SPT-2 cable
18 AWG copper conductors
This two-pack of 2FT IEC C7 Figure 8 cords provides a distinctive combination: a pair of short replacements for devices positioned very close to an outlet. The product has a 4.6 customer rating and includes two separate cables, making it useful for a television plus a nearby game console, projector, or speaker with the same two-prong inlet.
Pros
- Includes two replacement cords
- Short length reduces clutter
- ETL-listed construction
- Soft PVC jacket
- Wide two-prong compatibility
Cons
- Two feet suits only close outlets
- Cannot replace three-prong cords
We may earn a commission when you buy through this link, at no additional cost to you.
The right-angle C7 end is designed to lie flat in narrow spaces and protect the cord from sharp bending. The listing highlights a black soft PVC shell with wear, temperature, and tensile resistance characteristics, along with an 18 AWG pure copper core conductor. The cord is ETL listed, uses an IEC 320 C7 to NEMA 1-15P configuration, and is rated for 7A at 125V.
Compatibility is listed across Samsung, LG, and Apple televisions, scanners, printers, projectors, powered speakers, sound bars, PlayStation models, Canon PIXMA, Epson, and HP printers, and Xbox One models with the appropriate inlet. The two-foot length is the primary limitation. It is ideal for a device immediately beside an outlet but will not comfortably reach a more conventional wall-mounted position.
This set is best for very compact installations where cable clutter is unacceptable and an outlet sits immediately beside the equipment. Having two cords also provides a backup for a frequently moved accessory. It is not the right choice for a wall-mounted TV unless the outlet is exceptionally close, and buyers should verify that the two-slot connector and right-angle orientation match their equipment.
Two Cords Included
The package includes two matching cables, allowing one to serve as a backup or to connect a second compatible device. This is particularly convenient for matching game-console and television setups.
Minimal Cable Clutter
At only two feet, the cable is easy to conceal behind compact equipment. The right-angle end further reduces the depth required beside the device.
We may earn a commission when you buy through this link, at no additional cost to you.
10. 12FT Right Angle C7 Cord – Best Extended-Reach Replacement
12FT Right Angle C7 Cord
Twelve-foot cable length
18 AWG two-conductor cable
Downward-angle IEC C7
UL-listed construction
The 12FT TV power cord is the longest option in this guide and offers a 4.7 customer rating. It uses a non-polarized NEMA 1-15P male wall plug and a downward-angled IEC 60320 C7 Figure 8 female connector, making it suited to televisions and other devices positioned unusually far from an outlet.
Pros
- Longest listed cable length
- UL-listed construction
- Right-angle downward connector
- Double-insulated cable jacket
- Broad two-prong equipment use
Cons
- Likely excess slack for close setups
- Downward orientation must match inlet
We may earn a commission when you buy through this link, at no additional cost to you.
A twelve-foot cable can be particularly useful when a television is mounted high, placed on a long entertainment console, or connected to an outlet that is not directly behind the display. The right-angle connector reduces the depth needed at the equipment inlet, and the product is listed for desktop computers, scanners, printers, LED TV monitors, projectors, powered speakers, and laser printers.
The cable construction is described as NISPT-2 18 AWG two-conductor wire with a molded PVC jacket and double insulation. It is also listed by UL. The defining caveat is orientation: this is specifically a downward-angled C7 connector, so it will not be equally suitable for every recessed inlet. The plug may also be deeper than a straight connector, requiring adequate clearance around the device.
Buy this cable when extended reach is a genuine requirement and the connector orientation matches the installation. It is less appealing for a TV beside its outlet, where twelve feet would create unnecessary slack and make cable management more difficult. As with every two-prong replacement, it cannot substitute for a three-prong lead, and checking the original connector remains essential.
Maximum Placement Reach
The extended length is valuable for high wall mounts, large furniture, and outlets placed well away from the screen. It reduces the need to stretch a shorter cable or leave a strained connection.
Check the Downward Angle
A downward-angled connector may not work in an inlet that requires the cable to turn upward or sideways. Compare the connector geometry and available clearance before ordering.
We may earn a commission when you buy through this link, at no additional cost to you.
Buying Guide – How to Choose the Best Right Angle Power Cords for TV
The most important buying decision is connector compatibility, followed by cable length, right-angle orientation, and clearance. Certification and construction details help narrow the field, but the replacement must physically and electrically suit the television's original power inlet.
Identify the TV Inlet
Choose the cord that exactly matches the original connector, including the number of pins and slot arrangement.
Confirm the Right-Angle Direction
Verify the angle, insertion depth, and nearby furniture before buying.
Measure Practical Cable Length
Choose a length that reaches comfortably without creating excessive, visible loops.
Match Electrical Ratings
Confirm both connector configuration and listed electrical specifications.
Consider Safety Certification
Prefer a recognized safety listing when possible, then verify fit separately.
Assess Connector Depth and Strain Relief
Leave enough room for the connector body, not just the wire.
Review Device Compatibility
Check the specific model's inlet instead of relying on the television brand alone.
Plan Cable Management
Plan the full route and use suitable management accessories to protect the cable.
How to Use and Care for Your Right Angle Power Cords for TV
Before installation, switch off and unplug the television, then confirm that the new connector matches the inlet in shape, pin count, and approach angle. Compare it with the original cord and inspect the replacement for damage. If the TV is wall mounted, position the display temporarily or use a helper so the power connection can be reached safely.
Route the cable before inserting it fully. Keep the right-angle end aligned with the inlet rather than twisting it under load, and leave enough slack to allow the television to move slightly if it is on a stand. Plug the C7 or C13 connector into the television first, then connect the NEMA plug to a properly grounded wall outlet where applicable.
To care for the cord, unplug it by holding the connector rather than pulling the cable. Avoid pinching it behind furniture or creating tight loops that exceed its bend radius. Keep it away from hot surfaces, liquids, and foot traffic, and inspect the molded ends periodically for cracking, discoloration, or exposed conductors. Replace the cord if damage appears.
Frequently Asked Questions
What is a right angle power cord for a TV?
It is an AC power cable whose device-end connector bends 90 degrees instead of projecting straight outward. The L-shaped or angled end can fit into a recessed television inlet with less space behind the screen. It is especially useful for wall-mounted TVs, narrow entertainment centers, and setups where a straight plug would force the cable into a tight bend.
Are all right angle TV power cords compatible?
No. Right angle describes the connector shape, while compatibility depends on the inlet, pin count, dimensions, and orientation. Many TVs use a two-prong IEC C7 Figure 8 connection, but others use a three-prong IEC C13 connection. Check the original cord and compare the connector shape before ordering, and do not force a plug that does not fit comfortably.
Will a right angle cord let my TV sit closer to the wall?
It can, because the angled plug usually uses less horizontal space behind the television than a straight plug. The exact clearance still depends on the connector depth, wall-mount bracket, ventilation requirements, and nearby cables. A right-angle cable cannot compensate for inadequate ventilation, so follow the television manufacturer's mounting guidance.
What length right angle TV power cord should I buy?
Measure the route from the television to the outlet and choose a cord that reaches without pulling tight. Five or six feet is convenient for nearby outlets, while ten or twelve feet provides more placement freedom for distant outlets or high wall mounts. Longer cords require more careful routing so excess slack does not create visible clutter.
Can I use a two-prong right angle cord for a three-prong TV?
Only if the television's actual inlet is designed for a two-prong Figure 8 connection. A three-prong IEC C13 inlet cannot safely or physically accept a C7 two-prong cord. The ground and pin configuration are part of the connector, so match the full inlet rather than considering only the number of holes visible on a wall outlet.
Are right angle power cords safer than straight cords?
The right-angle geometry itself does not determine electrical safety. Certifications such as UL, ETL, or CSA, along with the listed wire gauge, voltage, and amperage, provide more meaningful safety information. A properly certified, undamaged cord with a correct connector is suitable for a compatible device; a damaged or incorrectly rated cable is not.
Why does my right angle plug sit deeper than the original?
An angled connector often has a larger molded body than a slim straight plug, and some replacement cables are deeper than others. This can matter in shallow speaker, projector, sound bar, or television sockets. Compare connector depth and nearby clearance rather than relying only on the fact that the pins appear to fit.
Can I route a right angle power cord through a wall?
Only through an appropriately rated installation and according to local electrical requirements. The cable itself may have a jacket not intended for in-wall use, and connectors should not be buried in a wall cavity. Use a listed in-wall cable, appropriate box, and professional installation when the route requires it.
Final Thoughts on Choosing the Best Right Angle Power Cords for TV
The Ancable 6FT Right Angle C7 cord is the strongest all-around choice because it combines a useful length, a 4.8 customer rating, UL-listed construction, and detailed compatibility guidance. The 5ft right angle Figure 8 option is the best budget and compact solution, while the Superer 10FT L-Shaped cord is the premium pick for buyers who prioritize certification, a copper core, extended reach, and warranty support.
Regardless of which option you favor, begin with the connector rather than the length. A two-slot IEC C7 inlet requires a two-prong Figure 8 cord, and a three-pin IEC C13 inlet requires a compatible grounded C13 lead. Then check the angle, insertion depth, available space behind the television, and the measured distance to the outlet so the final installation is both secure and tidy.
Current prices, ratings, certifications, and listing details can change, so review the latest product page before making a purchase. Comparing the connector images and specifications against your television's original power cord is the most reliable way to avoid an unnecessary return. Once those details match, a properly rated right angle cord can make a wall-mounted TV cleaner, neater, and easier to position.